Mobile: +86 181 2678 7728
Tel: +86 769 8163 1488
Fax: +86 769 8163 1611
Add: 2nd Industrial Park, HuanBaoNan Road, ShaTian, DongGuan, GuangDong, P.R.C.
With the further improvement of domestic surface cleaning requirements, the application of shot blasting machine is becoming more and more extensive. What are the wrong operations of the equipment in the use process?
1. The pellets were not added in time, the working principle of the shot blasting machine is to shoot the steel pellet to the surface of the workpiece at high speed through the pelletizer for cleaning. The pellet material is a consumable product. As the work of the pellet thrower decreases gradually, the cycle of lifting and separating cannot be completed when the pellet material is insufficient, which affects the quality of shot blasting.
2. The wrong starting sequence of the shot blasting machine: Failure to start up the pelletizer in accordance with the operating instructions; the feeding gate is not opened after the shot thrower was opened, which may cause the shot thrower to idle.
3. Wrong power off sequence: Close the pelletizer in advance, causing the pelletizer to enter the pelletizer continuously. The motor will burn down easily when the machine is started up next time.
4. While the speed of roller conveyor of pelletizer is too fast or too slow, it can be regulated. If the user fails to adjust the speed according to the instruction, too fast or too slow will affect the quality of shot blasting.
5. The slack belt of the hoist: the hoist is equipped with a belt tightening device, which can be used when the belt is not tight. After the belt loosens, the hoisting machine cannot complete the lifting of pellet material, which is easy to damage the equipment.